Tag: jailbreak guide

How to Download and Enable Vnodebypass Jailbreak Bypass for iOS 12-14.X

Vnodebypass is a jailbreak bypass tweak developed for Apple devices. When you enable this tweak, it will disable all installed jailbreak tweaks and basically put your device in a quasi-non-jailbroken state. This allows you to freely run any app that may not run when your device is in a jailbroken state. In this article, we will show you how to download and enable vnodebypass jailbreak bypass on iOS 14 and below.

REQUIREMENTS

A jailbroken iPhone, iPad, or iPod touch
unc0ver v6.1.0 (or later) on iOS 14 or above
A jailbreak package manager
libkrw package

Step 1:

Fire up your preferred package manager, search for “libkrw” by Siguza and install it.

We will use the Zebra package manager in this walkthrough for demonstration purposes.

This package is available on the default Elucubratus repo (https://apt.bingner.com/). Make sure that you install v1.1.0 or above.

Step 2:

Open Safari and download vnodebypass v0.2.3 from the official GitHub repository of the project here.

Step 3:

Now open the downloaded package in Zebra or Cydia and install it. Once you install the tweak, close your package manager.

Step 4:

The vnodebypass app should now appear on your home screen with the default white icon.

If for some reason the app doesn’t appear on your home screen, open the terminal and run the uicache command.

Step 5:

Launch the app and press Enable to enable the tweak.

Since it now comes with a front-end GUI, you no longer have to rely on PowerSelector or the terminal to enable it.

Step 6:

Run the app you want to bypass now that your device is in a non-jailbroken state. If the app fails to launch, try reinstalling it from the App Store.

Step 7:

Once you’re done, close the app and launch vnodebypass again. Press Disable to disable the tweak and go back to jailbreak mode again.

Note:

Vnodebypass jailbreak detection bypass cannot replace KernBypass-a kernel-level detection bypass. It may not be suitable for all apps that may be bypassed by kernel-level tweaks. Please note that it is an “experimental” tool and should be treated as such. We only recommend that you enable it only when you need to run certain apps. After closing vnodebypass, disable it immediately to avoid any potential problems.

How to Jailbreak iOS 11.0 ~ iOS 14.8 on iPhone or iPad Using Unc0ver Jailbreak

Unc0ver has released v8 of their tool that can jailbreak A12-A13 iPhones running iOS 14.6 ~ iOS 14.8. So, now you can jailbreak iOS 12.0 ~ iOS 14.8 on A12/A13 iPhones.

For other iPhones or iPads, Uncover supports jailbreaking iOS 11.0 ~ iOS 14.5.1. Here’s how to use Unc0ver to jailbreak your iPhone or iPad.

Compatible Devices：

iPhones Running iOS 12.0 ~ 14.8:

iPhone XR
iPhone XS
iPhone XS Max
iPhone SE (2020)
iPhone 11
iPhone 11 Pro
iPhone 11 Pro Max

iPhones/iPads Running iOS 11.0 ~ iOS 14.5.1:

iPhone 6s
iPhone 6s Plus
iPhone 7
iPhone 7 Plus
iPhone SE (2016)
iPhone 8
iPhone 8 Plus
iPhone X
iPhone 12 mini
iPhone 12
iPhone 12 Pro
iPhone 12 Pro Max
2020 iPad Pro
2018 iPad Pro
2017 iPad Pro
iPad Air 4
iPad Air 3
iPad Air 2
iPad mini 5
iPad mini 4
5th/6th/7th gen iPad

Preparations Before Jailbreaking:

Delete any iOS 11.0 ~ iOS 14.5.1 OTA update file from Settings > Storage and reboot your device before attempting to jailbreak it.
Unc0ver jailbreak supports Substitute for tweak injection and Cydia for package management.
Make sure to create a backup of all important data on your device before proceeding with the jailbreaking steps.

Processes of Unc0ver Jailbreak

Step 1:

Download AltServer on your PC and open it. Proceed to connect your iPhone to your PC over USB. You will have to install a Mail plugin as a part of setting up AltStore.

Step 2:

Click on the AltServer icon from your Mac’s menu bar, select Install AltStar, and then proceed to select your iPhone or iPad.

Step 3:

An AltStore icon should now show up on the home screen of your iPhone. After that, go to Settings > General > Device Management, tap on your Apple ID, and trust its Developer Certificate.

Step 4:

With your iPhone connected to your PC, download the latest version of Unc0ver. You should see an “Open In..” option that you’ll use to open the IPA in AltStore. This will start the installation process. You might have to enter the Apple ID credentials during the installation process for certificate signing purposes. Make sure to use the same Apple ID that you had used above.

If you don’t get the AltStore option in “Open In..”, you can go to Unc0ver’s website on your iPhone and download the IPA. This will bring up a prompt to open the app via AltStore.

Step 5:

Go back to your iPhone’s home screen, open Unc0ver, tap the Jailbreak button, and wait for the app to do its job. Your iPhone will respring during the process, after which you should see the Cydia icon on your home screen.

Note:

The jailbreaking process may cause errors and lead to failure. If this happens, just restart your iPhone, open the Unc0ver app, and try to jailbreak again.

If the Unc0ver app still cannot jailbreak your iPhone, for example, the app keeps crashing or seems to be stuck, you need to close the Unc0ver app, clear all app caches, restart your iPhone, turn on the Airplane mode, and then try to jailbreak your iPhone again.

How to Jailbreak iPhone 11/Pro, iPhone XS, iPhone XR on iOS 13 – iOS 13.3 Using unc0ver Jailbreak

The detailed jailbreak guide works for iOS 13 – iOS 13.3 on A12-A13 Bionic devices.

Jailbreak Compatible Devices:

iPhone XR
iPhone XS
iPhone XS Max
iPhone 11 Pro
iPhone 11 Pro Max
iPhone 11

Preparations Before Jailbreaking:

Remove all iOS 13 OTA update files from Settings < Storage and then restart your device before trying to jailbreak.
Unc0ver jailbreak has full support for Cydia and Substrate.
Before proceeding with the jailbreak steps, make sure to create a backup of all your important data on your device.

Processes of unc0ver Jailbreak

Step 1:

Download AltServer on your PC and open it. Continue to connect iPhone to PC via USB.

Step 2:

Click the AltServer icon from the Mac’s menu bar, select “Install AltStore“, and then continue to select your iPhone or iPad.

During the installation process, you will be prompted to enter your Apple ID credentials.

Step 3:

The AltStore icon should now appear on the iPhone’s home screen. After connecting your iPhone to your PC, go to Unc0ver.dev and download the latest version of Unc0ver.

Step 4:

After downloading, use the “Open In ..” option to open IPA in AltStore. This will begin the installation process. You may need to enter your Apple ID credentials during the installation process for certificate signing.

Step 5:

Open Unc0ver, click the “Jailbreak” button, and wait for the app to finish its work. Your iPhone will bounce up in the process, and you should see the Cydia icon on your home screen.

Note:

If an error occurs during the jailbreak process, you need to close the Unc0ver application, clear all application caches, restart your device, turn on airplane mode, and then try jailbreaking your device again.

Untethered Jailbreak iPhone iPad iPod iOS 8

This Pangu untethered jailbreak guide works for all iPhone, iPad, iPod Touch and iPad Mini running iOS 8 and 8.1

iPhone 6, iPhone 6 Plus, iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S
iPad Air, iPad 4, iPad 3, iPad 2
iPad mini, Retina iPad mini
iPod touch 5G

Preparations:

Notice: If you already made a backup for your device or don’t want to back up it, please skip the first 2 steps below and download jailbreaking tool directly. However, the backup is always suggested in case you lose important information during jailbreaking.

Step 1: Download latest iTunes HERE

Step 2: Back up your device:

Plug into your device and launch iTunes
Click your device on the upper right corner
Click Back Up Now and wait for the sync to finish

iPhone Backup

Download jailbreaking tool:

Additional Notices:

It is suggested to restore your iOS 8 WITH ITUNES first. OTA Update may lead to jailbreak failure.
Please go to Settings – General – Passcode Lock and turn it off.
The interface language of Pangu is Chinese. Don’t worry if you fail to read what it says in the program window.
Please be patient when Pangu is jailbreaking your device. DO NOT try to open iTunes or Xcode or it may run into errors.

Ready to Go!

Step 1. Open Pangu downloaded and plug in the iOS device you want to jailbreak.
Pangu iOS 8 Jailbreak

Step 2. Click the tab marked as "1" at the left, and click the blue button marked as "2" to start jailbreaking. If you don’t want to install the Chinese app store PPHelper, you can uncheck the option above the jailbreak button.
Pangu iOS 8 Jailbreak Start

Step 3. The jailbreaking process will continue by itself and the interface will change for several times. Please be patient and wait for the process to complete.

Step 4. Your device will reboot and restore as well. When the process completes, please unlock and tap "Pangu" app icon on your Home screen.
Click Pangu icon to continue

Step 5. You can install Cydia from Pangu someday soon. Please be acknowledged that Cydia is NOT available from Pangu at present. You can wait until it is loaded or install as this guide.
Click Pangu icon to continue

After install Cydia, you can download and enjoy the awesome apps, tweaks and tools like iKeyMonitor freely!

Security Notes:

It is strongly suggested to change the root password of the jailbroken device to reduce the risk.